How can I save electricity: simple recommendations that still work
Each month, paying public service bills, each of us comes to mind how to save electricity.
After all, such an article in spending is one of the most fundamental of the average family budget.Housing and municipal services increases from year to year, so this question is quite relevant.
Appropriate use of lighting products
Where to start saving?Experts recommend replacing standard switches for gradators.These devices allow you to adjust the light level.
After all, few people need a constant source of bright light in the kitchen, in the bedroom, the toilet or the bathroom.As a rule, there is a fairly small power.
This is particularly true for situations when you enter the room for a minute, watch a film or play computer games.
You can continue to save by simply replacing ordinary incandescent bulbs with LEDs.They contribute to much less energy consumption.
As for energy saving lamps, despite the fact that they also help reduce electricity costs, not all experts recommend them.
The fact is that in their manufacturers use mercury.
In addition, these lamps give a light unnatural light, which may not affect vision in the best way and considerably reduce its acuity.In addition, their lifespan is not as reliable as LED.
Despite the fact that the latter are quite high, they will be paid quickly.By using them, you can save on payment.
For example, a lamp of 4 will be 16 times more economical than a standard incandescent lamp of 75 watts.And it will give Sveta exactly the same amount.
Therefore, it is better to spend money on the LED lamp once paying several times more.
In addition, according to their manufacturing companies, their validity period is around 30,000 hours.At the average time of the work process, 4 hours a day, a lighting game is sufficient for more than ten years!
In addition, they are safer than ordinary fire because they hardly heat up.Consider their acquisition as long -term investments and investments and they will be more than more than.
You can save electricity by increasing the number of light sources around the entire perimeter of the accommodation.
In this case, it will be easy to regulate the necessary lighting.For example, there is no need to turn on the light throughout the bedroom or the kitchen if you need to turn on the table.
Just turn on the wall lights or an office lamp.
How to properly use the technique?
The right choice of equipment and electrical devices will help to considerably minimize the cost of light:
- Remember that in stores, you must choose a technique with "a" energy consumption class.This letter means that iron, refrigerator, microwave, etc.consume a small amount of electricity.In addition, the class "B" is not inferior to it.A big error will be the acquisition of devices with the class "G", because it is the most energetic.
- The size of the equipment must be chosen according to the number of family members live in the apartment.For example, if the family consists of two people, do not buy a washing machine with a load of 5 kg.In addition, in this case, you will have to spend additional kilowatts of electricity, by launching a unit with half Empy.This also applies to the purchase of a powerful refrigerator, which is not necessary in a family of two people.
Disconnect the electrical equipment completely if you do not use them for a period.Remember that a fork in a socket should always be extinguished after the device!This is due to the fact that domestic equipment consumes electricity even in standby mode.Pass the same manipulation with chargers for phones, laptops and other devices.
Appropriate use of the refrigerator to get rid of unnecessary expenses
When you choose a refrigerator in the store, give preference to what does not have a frost function.A technique with a similar brand will considerably reduce electricity consumption.
It is best to put the refrigerator in the coolest place in the kitchen.The installation of such an equipment element near the stove will be wrong.It is recommended to put it outside the room.
It is she who is always larger than the others.This will allow the refrigerator not to overheat.
As for the freezer, it is best to keep it full of products.This supports the given temperature of electrical engineering is normal.
In addition, make sure that the freezer and refrigerator door is still in a closed condition.
No need to put hot drinks, soups and other liquids on the refrigerator shelves.Leave the food on plates, pots or in a cooled saucepan alone.It is free and you don't need to spend energy, and therefore pay an additional extra kilowatts.It should be remembered that milk, juices, soups and other liquids must always be closed.Otherwise, humidity will evaporate, which will result in energy consumption.
The kitchen slab will help save
When buying an apartment, buy the one that is equipped with a gas stove.The preparation of food is much more profitable than that which works for electricity.
You can also reduce payment by received thanks to the use of an induction stove.
It has the smallest energy consumption, because this domestic device only heats the bottom of the pan, cauldron or pots.And in ordinary tiles, the burner warms up.
In addition, do not forget that the diameter of the dishes for the preparation of various dishes must be a little more than the burner or make it match.
This will allow you to obtain better heat transfer due to an adjustment closer to the burner.Cooking with a closed lid will help not run electricity.
This method will heat food in dishes, not air in the kitchen.
Always turn off the stove 5 minutes before preparing the dish.Cook at high temperature for initial heating, then reduce.
The dish will reach the preparation and without using additional energy costs.
It is desirable to bring water to a boil to the gas, because a kettle that works on the network consumes a lot.In addition, when you work, it is involved in a very high power.
We wash, resume and saves
When you choose a washing mode, don't forget that most powders contain special components at their base and erase the low-temperature underwear well.
Therefore, it is not necessary to adjust it maximum.The same rule applies to major revolutions.In addition, do not launch a half -empty washing machine.It is best to record the laundry until it is fully loaded.
Residual heat can be used when ironing.To do this, 10 minutes before the end of this procedure, turn off the iron.The device will be hot all this time.
Place food paper on the ironing board.This will not spend electricity to heat its surface.
Other effective methods
The following recommendations will help minimize expenses:
- During the decoration of the rooms (choosing furniture, wallpaper, floor, paint ceiling and walls), give preference to light tones.After all, the lighter color the color, the more the light is reflected.In addition, to obtain a normal lighting level, much less electricity will be necessary.
- The next recommendation will be commonplace, but with its help, you can also considerably reduce receipt costs.To save electricity, you should wash the windows more often (depending on the degree of their pollution).The fact is that polluted glass always passes almost half of the sun and natural light.Consequently, it is necessary to configure high power gradators.The bulbs should also be wipped out of dust at least twice a month.In this case, everything will depend on the degree of pollution.
- If you are going to buy accommodation, consider that the southern side is the brightest.This means that during the day, additional lighting will not be necessary.
- Before lighting the divided systems or air conditioners, you should make sure that there are no drafts at home.Otherwise, such a technique will heat the street, not the rooms.Choose the air conditioners, depending on the size of the room.It will pay the light much less.In order to light the radiator as little as possible, you can put windows from plastic.Despite the fact that this pleasure is not cheap, over the years, it will be completely paying.
An obsolete television or computer instructor is better changed for more recent (LED, etc.).In the technique of old style, there is a high level of energy consumption.
The modern technique consumes very little electrical energy.Do not light the scanner either, the printer is not necessary.